Before drilling holes in a wall, make sure there are no water or gas pipes or electrical wires in the place where you want to drill. There are special electronic detectors that allow locating the position of hidden pipes or cables.
Mark the correct position
Decide where you want to place your TV, and the best one option is TV mounting. You can lay it flat and fixed against the wall, or make it adjustable (by rotating or tilting). This can be useful for finding the best viewing angle from different positions (for example, from the kitchen).
Determine the ideal height
The standard rule for flat screen TVs is that the bottom edge should be 50-60cm off the ground. Of course, it all depends on your specific situation. A good idea is to try placing a piece of cardboard about the same size as the TV on the wall. Then sit back and watch it from different positions. When you’ve found a position that suits you, set the flat screen TV at the same height.
Can the brackets support the weight?
Make sure you buy brackets that are suitable for the size and weight of your flat panel TV (always check the specifications of the bracket). Read the manual of your flat screen TV and compare the data. Use good quality plugs and screws and the screw holes provided on the bracket. Hire painting services Brooklyn to get best.
Wall distance
You can mount your flat screen TV close to the wall, but that doesn’t mean you won’t be able to adjust the position of the screen. Remember that a flat screen TV generates heat; leaving a larger gap between the screen and the wall will improve ventilation. This also reduces the chance of creating dark spots caused by dust build-up on the wall, and also leaves room to adjust the angle of the screen horizontally and vertically.
Measure the size of the VESA mount
To choose the correct wall mounting bracket, measure the distance between the screw holes on the back of your flat screen TV. The most common sizes are 10 x 10 cm and 20 x 10 cm from center to center.
Hide the wires
In addition to the power cable and antenna cable, there are several other cables that are commonly used to connect a flat screen TV to other devices such as DVD players, video game consoles, digital TV set-top boxes, and satellite receivers. These units are often kept in a cabinet on the floor, so you’ll need to find the best way to route the cables to the TV. A good way to do this is to use a grommet to keep the cables well collected and hidden. Another option is to use a TV stand with shelving where the other devices would be placed. For this you should take installation services from experts such as kinginstallation.